selected publications
-
academic article
- Experimentally Mapping Water Surface Elevation, Velocity, and Pressure Fields of an Open Channel Flow Around a Stalk. Geophysical Research Letters. 49. 2022
- Application of Proper Orthogonal Decomposition to Study Coherent Flow Structures in a Saccular Aneurysm. Journal of Biomechanical Engineering. 143:061008. 2021
- A Biologically Friendly, Low-Cost, and Scalable Method to Map Permeable Media Architecture and Interstitial Flow. Geophysical Research Letters. 48:e2020GL090462. 2021
- Pacific Lamprey Drag Force Modeling to Optimize Fishway Design. Journal of Ecohydraulics. 2020
- Particle Seeded Grains to Identify Highly Irregular Solid Boundaries and Simplify PIV Measurements. Frontiers in Earth Science. 2019
- Seeing through porous media: An experimental study for unveiling interstitial flows. Hydrological Processes. 32:402-407. 2018
- Entropy Generation for Bypass Transitional Boundary Layers. Journal of Fluids Engineering - Transactions of the ASME. 139. 2017
- Energy and demand implication of using recommended practice occupancy diversity factors compared to real occupancy data in whole building energy simulation. Journal of Building Performance Simulation. 8:408-426. 2015
- Effects of adverse and favorable pressure gradients on entropy generation in a transitional boundary layer region under the influence of freestream turbulence. International Journal of Heat and Mass Transfer. 77:475-488. 2014
- Entropy generation in a transitional boundary layer region under the influence of freestream turbulence using transitional RANS models and DNS. International Communications in Heat and Mass Transfer. 41:10-16. 2013
- Ultrasonic particle size fractionation in a moving air stream. Ultrasonics. 50:26-31. 2010
- Three-axis acoustic device for levitation of droplets in an open gas stream and its application to examine sulfur dioxide absorption by water droplets. Review of Scientific Instruments. 78. 2007
- The boundary layer over turbine blade models with realistic rough surfaces. Journal of Turbomachinery-transactions of the Asme. 129:318-330. 2007
- The effect of large openings on cavity amplification at ultrasonic frequencies. Journal of the Acoustical Society of America. 112:2771-2778. 2002
- Model studies of the flow in abdominal aortic aneurysms during resting and exercise conditions. Journal of Biomechanics. 32:1319-1329. 1999
- Grid turbulence in compressible flow. Experiments in Fluids. 23:520-522. 1997
- Laminar pulsatile flow through an axisymmetric sudden expansion. Journal of Fluids Engineering - Transactions of the ASME. 119:208-211. 1997
- The influence of shape on the stresses in model abdominal aortic aneurysms. Journal of Biomechanical Engineering. 118:326-332. 1996
- Refractive Index Matching Methods For Liquid Flow Investigations. Experiments in Fluids. 17:350-355. 1994
- A Study Of The Effect Of Aspect Ratio On Vortex Shedding Behind Circular-Cylinders. Physics of Fluids A-fluid Dynamics. 3:309-315. 1991
- Two Improved Methods for Low-Speed Hot-Wired Calibration . Measurement Science and Technology. 2:643-646. 1991
- A New Method For Insitu Dynamic Calibration Of Temperature Sensors. Review of Scientific Instruments. 60:3717-3720. 1989
- Heat-Transfer In Laminar, Oscillatory Flow In Cylindrical And Conical Tubes. International Journal of Heat and Mass Transfer. 32:923-934. 1989
- 2 New Circuits For Hydrogen Bubble Flow Visualization. Journal of Physics E-scientific Instruments. 22:250-254. 1989
- The Onset And Development Of Circular-Cylinder Vortex Wakes In Uniformly Accelerating Flows. Journal of Fluid Mechanics. 232:611-627.
-
conference paper
- Optimizing Economizer Operation by Virtual Commissioning through Remote Co-Simulation. International Building Simulation Conference. 2017
- Laminar And Transitional Boundary Layer Entropy Generation Over A Flat Plate Under Favorable And Adverse Pressure Gradients. Proceedings of the ASME Fluids Engineering Division Summer Meeting, 2013. 2014
- MEASURING THE TEMPERATURE COEFFICIENT OF RESISTANCE FOR NANOSPRING COMBUSTION CATALYSTS. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2013. 2014
- PARTICLE IMAGE VELOCIMETRY MEASUREMENTS IN A REPRESENTATIVE GAS-COOLED PRISMATIC REACTOR CORE MODEL: DISTRIBUTION OF FLOW FROM THE UPPER PLENUM TO THE FUEL BLOCK ARRANGEMENT. Proceedings of the ASME Fluids Engineering Division Summer Meeting, 2013. 2014
- REYNOLDS AVERAGED NAVIER STOKES MODELS COMPARED TO DIRECT NUMERICAL SIMULATIONS IN AN ADVERSE PRESSURE GRADIENT BOUNDARY LAYER OVER A FLAT PLATE. Proceedings of the ASME Fluids Engineering Division Summer Meeting, 2013. 2014
- Catalytic Ignition of Ethanol-oxygen-nitrogen Mixtures Over 90% Platinum-10% Rhodium in Comparison with Pure Platinum. ASME 2011 International Mechanical Engineering Congress and Exposition. 1389-1398. 2012
- DESIGN OF A LOW COST, PARTIAL FLOW DILUTION TUNNEL WITH TAPERED ELEMENT OSCILLATING MICROBALANCE PARTICULATE MEASUREMENT. ASME 2011 International Mechanical Engineering Congress and Exposition. 1295-1302. 2012
- Measuring Ignition Temperature and Heat Generation from Moist Propane-oxygen Mixtures on Platinum. ASME 2010 International Mechanical Engineering Congress and Exposition. 1543-1552. 2012
- Measuring Ignition Temperature and Heat Generation from Ethanol-oxygen-water Mixtures on Platinum. ASME/JSME 8th Thermal Engineering Joint Conference 2011. 193-202. 2011
- Finite Element Model of a Heated Wire Catalyst in Cross Flow. 2008 ASME International Mechanical Engineering Congress and Exposition. 603-614. 2009